0 $0.00

Darren’s Carbon Fiber vinyl graphics

$65.00
Image 1 of Darren’s Carbon Fiber vinyl graphics
Image 2 of Darren’s Carbon Fiber vinyl graphics
Image 3 of Darren’s Carbon Fiber vinyl graphics
1 of 3
View cart

Darren’s Carbon Fiber Vinyl Graphics


4 - decals total. Carbon Fiber speciality vinyl.


2- 11.5” circles with the bar and shield cutout.


2- 3” circles with the bar and shield cut out.


Sharp, defined corners and edges, an amazing addition to your saddlebags or fairing! 


Orders are taking 2-3 days in production before shipping.


Other sizes available, please contact me for pricing.

  

There are no exact matches to HD paint, many are close but nothing is exact. If you have questions or concerns regarding colors, please contact me before ordering.


Please double check your order before checkout (Color, product, size, etc) as there are no refunds or exchanges after the decal is cut. These ARE made to order.

If your decal arrives damaged for ANY reason, photos must be taken BEFORE installation for a replacement to be sent. both decals must be shown along with the condition of the box.

ANY modification/change to a graphic MUST be discussed BEFORE ordering. Cost, time frame and other factors need to be considered. ALL decals will be shipped AS SHOWN if modifications are not quoted beforehand.


PAINT/FINISH DISCLAIMER: Gladiator Graphics is not responsible for damage to paint, clear coat, powder coat, or other surface finishes occurring during application or removal of decals. Customer is responsible for ensuring that the application surface is properly prepared, fully cured, and free from compromised, peeling, poorly bonded, oxidized, repainted, or otherwise defective coatings. Decals may adhere more strongly than an underlying finish, and removal may expose pre-existing adhesion or coating defects. By purchasing and/or applying the product, customer acknowledges and accepts this risk.


*IMPORTANT* Please be aware that the surface MUST be cleaned and free of dust, dirt, scratches, grooves, wax including ceramic coating. Any of these contaminants MAY inhibit the adhesion of the decal. If your decal does not stick to the surface or release from the transfer tape, the surface is not free of these problems. For a proper and long lasting application, the surface must be free of all of the above issues.